Synchronizable and with alternating flash patterns
Pollux9+ Strobes can be synchronized with each other, which means that all additional lights use the same flash pattern and flash in time/synchronized. But you also have the option of an alternating flash pattern, which means that your additional lights can be divided into two different groups so that they flash opposite each other (e.g. right / left or upper / lower). All flash patterns can be used alternately, which means that you get 10 different flash patterns with this function. You can synchronize and use alternating flash patterns with an infinite number of additional lights, i.e. there are no restrictions on the number.
 
Characteristics:
Five different flashing light patterns, one ECE R65 approved
Synchronizable with each other
E-marked (E8, ref. 37.5), ECE R112 / R10 / R7
EMC protected (do not interfere with the radio)
With position lights (4 LEDs) in yellow-orange or xenon white, plug in the color you want
Driving beam light pattern (wide and oblong) with a range of 960 m (0.25 lux), 480 m (1 lux)
"Spot beam" light pattern (oblong with light far ahead on the road) with a range of 1148 m (0.25 lux), 574 m (1 lux)
12000 lumens (theoretical), 9600 lumens (actual)
Cool white light (6500 K)
TIR optical system (Total Inner Reflection)
Pressure equalization membrane
36 month warranty
 
Technical data:
120 W (12 x 10 W Cree XM-L2 LED)
4 LEDs for flash light
Nominal power 92.4 W
IP68 (water/dustproof) 
6-pin DT connector (includes 2-pin adapter)
Electronic heat management
Voltage 9-36 V
Load 7.7 A @ 12 V and 3.6 A @ 24 V
 
Dimensions & weight:
Width: 218 mm
Height: 234.5 mm (incl. bracket)
Depth: 68.5 mm
Weight: 1.9 kg
Cable length: 650 mm
 
Included:
Pollux9+ Strobe Ledson LED additional light 9" with flash function
Bolts and screws to attach the auxiliary light with either one or two attachment points
DT connector (6-pin, 2-pin adapter included)
Installation instructions