Commander12 Gen2 relay box/electrical control unit - turn LED ramps, auxiliary lights, work lights, etc. on and off or turn other devices on and off with a single push of a button! The second generation of Commander is upgraded with memory that remembers your settings even after you turn off the ignition/vehicle.
Programmable control panel with 12 individual outputs, controls up to 12 units separately or together. Remote control with adjustable backlighting (RGB, choose exactly the color you want!) included, with 315cm cable. There is also app support with SwitchPanel for control via Bluetooth ( Android and Apple ).
Ledson Commander has a direct input (yellow cable) to control LED ramps/auxiliary lights etc via the vehicle's analog high beam signal/high beam lamp. Works on 12V/24V with MosFet/electronic relays, protection against overheating, overload, short circuit and polarity protection.
Included: Commander relay box with remote control, battery wiring with fuse, spare fuses, 70 different stickers with symbols to attach to the remote control, mounting bracket with screws for relay box and remote control, assembly instructions.
Commander Relay Box Gen 2(Remotely Control 12 Lights)
1. Max total current: 100A (1200W at 12V, 2400W at 24V).
2. 12 individually programmable switches.
3. The maximum total current for this unit is 100A.
4. Maximum current per output at 12V:
- Output fuses 1 and 5 are 30A - activated when yellow wire is energized
- Output fuses 2, 3, 8 and 9 are 20A
- Output fuses 4, 7, 10 and 11 are 10A
- Output fuses 6 and 12 are 5A
- If the output has been overloaded, a red LED will indicate next to the fuse that has blown
5. Built-in Bluetooth for app control.
6. Protection against overheating, overload, short circuit, polarity protection.
7. Direct high beam control to circuit 1 and circuit 5.
8. Programmable icons.
9. Backlit switches with selectable backlight.
10. LED indication for overload/blown fuse.
11. Each switch can be programmed for three different functions:
- Toggle between On/Off
- Toggle between On/Off as long as the button is pressed
- Strobe functionDimensions of the control panel:
Length: 116 mm
Width: 89 mm
Height: 14 mm
Dimensions of the relay box:
Length: 150 mm
Width: 117 mm
Height: 38 mm